BLU G50 Mega vs alcatel Flash Plus

Key differences

Calculated from recorded specifications using minimum difference thresholds. These are differences, not an overall ranking. For three phones, numeric highlights compare the two extremes.

• WeightFlash Plus: 43 g lighterFlash Plus: 147 g · G50 Mega: 190 g
• WidthG50 Mega: 3.9 mm narrowerG50 Mega: 72.5 mm · Flash Plus: 76.4 mm
• Screen diagonalFlash Plus: 1 in smaller diagonalFlash Plus: 5.5 in · G50 Mega: 6.5 in
• Rear camera layoutDual / SingleG50 Mega: Dual · Flash Plus: Single
• DepthFlash Plus: 1.3 mm thinnerFlash Plus: 8 mm · G50 Mega: 9.3 mm
• HeightFlash Plus: 3.8 mm shorterFlash Plus: 152.3 mm · G50 Mega: 156.1 mm

Relative size, not calibrated actual size. Front and side outlines share one scale and a bottom baseline. Generic outlines use recorded body dimensions, excluding camera bumps.

1. 1. G50 Mega

   Height

   156.1 mm+3.8 mm versus Flash Plus

   Width

   72.5 mm

   Depth

   9.3 mm+1.3 mm versus Flash Plus

   Weight

   190 g

2. 2. Flash Plus

   Height

   152.3 mm

   Width

   76.4 mm+3.9 mm versus G50 Mega

   Depth

   8 mm

   Weight

   147 g

Screen size

Approximate rectangular screens calculated from recorded diagonal and aspect ratio at one relative scale. Rounded corners and cutouts are not subtracted. These are not phone outlines or calibrated actual sizes.

1. 1. G50 Mega 6.5 in · 20:9 About 102 cm² rectangular area
2. 2. Flash Plus 5.5 in · 16:9 About 83.4 cm² rectangular area

G50 Mega has approximately 22.3% more rectangular screen area than Flash Plus.

Memory variants

Each row compares the same storage capacity. Cells show recorded RAM alternatives, not combined maxima. Not recorded does not mean unavailable in every market.

Practical features

Explicit Yes and No values are shown directly. Qualified or regional records retain their details. Unknown means the record is missing.

Battery capacity

Capacity is not battery life. No endurance test is implied.

Open a section for more detail. On narrow screens, swipe sideways or use Left/Right arrow keys while the table is focused. Unknown means missing data, not No. Recorded zero values are shown as recorded.