Allview A4ALL vs Motorola QUENCH

Key differences

Calculated from recorded specifications using minimum difference thresholds. These are differences, not an overall ranking. For three phones, numeric highlights compare the two extremes.

• Weight

  A4ALL: 7.3 g lighter

  A4ALL:

  122.7 g

  QUENCH:

  130 g

• Width

  QUENCH: 2 mm narrower

  A4ALL:

  62 mm

  QUENCH:

  60 mm

• Screen diagonal

  QUENCH: 0.4 in smaller diagonal

  A4ALL:

  3.5 in

  QUENCH:

  3.1 in

• Release year

  A4ALL:

  2013

  QUENCH:

  2010

Relative size, not calibrated actual size. Front and side outlines share one scale and a bottom baseline. Generic outlines use recorded body dimensions, excluding camera bumps.

1. 1. A4ALL

   Height:

   115 mm

   Width:

   62 mm +2 mm versus QUENCH

   Depth:

   12.2 mm

2. 2. QUENCH

   Height:

   116.8 mm

   Width:

   60 mm

   Depth:

   12.4 mm

Screen size

Approximate rectangular screens calculated from recorded diagonal and aspect ratio at one relative scale. Rounded corners and cutouts are not subtracted. These are not phone outlines or calibrated actual sizes.

1. 1. A4ALL

   Screen diagonal:

   3.5 in

   Aspect ratio (height:width):

   3:2

   Approximate rectangular screen area:

   36.5 cm²

2. 2. QUENCH

   Screen diagonal:

   3.1 in

   Aspect ratio (height:width):

   3:2

   Approximate rectangular screen area:

   28.6 cm²

A4ALL has approximately 27.5% more rectangular screen area than QUENCH.

Memory variants

Each row compares the same storage capacity. Cells show recorded RAM alternatives, not combined maxima. Not recorded does not mean unavailable in every market.

No unambiguous storage/RAM pairings are recorded. See the original specifications below.

Practical features

Explicit Yes and No values are shown directly. Qualified or regional records retain their details. Unknown means the record is missing.

Battery capacity

Capacity is not battery life. No endurance test is implied.

Open a section for more detail. On narrow screens, swipe sideways or use Left/Right arrow keys while the table is focused. Unknown means missing data, not No. Recorded zero values are shown as recorded.