Asus P320 vs BLU Dash L3

Key differences

Calculated from recorded specifications using minimum difference thresholds. These are differences, not an overall ranking. For three phones, numeric highlights compare the two extremes.

• WeightP320: 30 g lighterP320: 105 g · Dash L3: 135 g
• WidthP320: 9.3 mm narrowerP320: 55 mm · Dash L3: 64.3 mm
• Screen diagonalP320: 1.4 in smaller diagonalP320: 2.6 in · Dash L3: 4 in
• ChipsetTI OMAP 850 / Mediatek MT6572 (28 nm)P320: TI OMAP 850 · Dash L3: Mediatek MT6572 (28 nm)
• DepthDash L3: 1.5 mm thinnerDash L3: 11.5 mm · P320: 13 mm
• HeightP320: 28.1 mm shorterP320: 99 mm · Dash L3: 127.1 mm

Relative size, not calibrated actual size. Front and side outlines share one scale and a bottom baseline. Generic outlines use recorded body dimensions, excluding camera bumps.

1. 1. P320

   Height

   99 mm

   Width

   55 mm

   Depth

   13 mm+1.5 mm versus Dash L3

   Weight

   105 g

2. 2. Dash L3

   Height

   127.1 mm+28.1 mm versus P320

   Width

   64.3 mm+9.3 mm versus P320

   Depth

   11.5 mm

   Weight

   135 g

Screen size

Approximate rectangular screens calculated from recorded diagonal and aspect ratio at one relative scale. Rounded corners and cutouts are not subtracted. These are not phone outlines or calibrated actual sizes.

1. 1. P320 2.6 in · 4:3 About 20.9 cm² rectangular area
2. 2. Dash L3 4 in · 5:3 About 45.5 cm² rectangular area

Dash L3 has approximately 117.5% more rectangular screen area than P320.

Memory variants

Each row compares the same storage capacity. Cells show recorded RAM alternatives, not combined maxima. Not recorded does not mean unavailable in every market.

No unambiguous storage/RAM pairings are recorded. See the original specifications below.

Practical features

Explicit Yes and No values are shown directly. Qualified or regional records retain their details. Unknown means the record is missing.

Battery capacity

Capacity is not battery life. No endurance test is implied.

Open a section for more detail. On narrow screens, swipe sideways or use Left/Right arrow keys while the table is focused. Unknown means missing data, not No. Recorded zero values are shown as recorded.