BLU R2 Plus vs Motorola One Hyper

Key differences

Calculated from recorded specifications using minimum difference thresholds. These are differences, not an overall ranking. For three phones, numeric highlights compare the two extremes.

• WeightR2 Plus: 43 g lighterR2 Plus: 167 g · One Hyper: 210 g
• Screen diagonalR2 Plus: 1 in smaller diagonalR2 Plus: 5.5 in · One Hyper: 6.5 in
• ChipsetMediatek MT6753 (28 nm) / Qualcomm SDM675 Snapdragon 675 (11 nm)R2 Plus: Mediatek MT6753 (28 nm) · One Hyper: Qualcomm SDM675 Snapdragon 675 (11 nm)
• Rear camera layoutSingle / DualR2 Plus: Single · One Hyper: Dual
• HeightR2 Plus: 6.1 mm shorterR2 Plus: 155.7 mm · One Hyper: 161.8 mm
• Release year2017 / 2019R2 Plus: 2017 · One Hyper: 2019

Relative size, not calibrated actual size. Front and side outlines share one scale and a bottom baseline. Generic outlines use recorded body dimensions, excluding camera bumps.

1. 1. R2 Plus

   Height

   155.7 mm

   Width

   77 mm

   Depth

   9.2 mm

   Weight

   167 g

2. 2. One Hyper

   Height

   161.8 mm+6.1 mm versus R2 Plus

   Width

   76.6 mm

   Depth

   8.9 mm

   Weight

   210 g

Screen size

Approximate rectangular screens calculated from recorded diagonal and aspect ratio at one relative scale. Rounded corners and cutouts are not subtracted. These are not phone outlines or calibrated actual sizes.

1. 1. R2 Plus 5.5 in · 16:9 About 83.4 cm² rectangular area
2. 2. One Hyper 6.5 in · 19.5:9 About 103.7 cm² rectangular area

One Hyper has approximately 24.4% more rectangular screen area than R2 Plus.

Memory variants

Each row compares the same storage capacity. Cells show recorded RAM alternatives, not combined maxima. Not recorded does not mean unavailable in every market.

Practical features

Explicit Yes and No values are shown directly. Qualified or regional records retain their details. Unknown means the record is missing.

Battery capacity

Capacity is not battery life. No endurance test is implied.

Open a section for more detail. On narrow screens, swipe sideways or use Left/Right arrow keys while the table is focused. Unknown means missing data, not No. Recorded zero values are shown as recorded.