i-mate SP5m vs Sharp SH530U

Key differences

Calculated from recorded specifications using minimum difference thresholds. These are differences, not an overall ranking. For three phones, numeric highlights compare the two extremes.

• WeightSP5m: 62.8 g lighterSP5m: 106 g · SH530U: 168.8 g
• WidthSP5m: 34.8 mm narrowerSP5m: 46.2 mm · SH530U: 81 mm
• Screen diagonalSP5m: 2.8 in smaller diagonalSP5m: 2.2 in · SH530U: 5 in
• ChipsetTI OMAP 730 / Mediatek MT6577 (40 nm)SP5m: TI OMAP 730 · SH530U: Mediatek MT6577 (40 nm)
• DepthSH530U: 7.6 mm thinnerSH530U: 9.9 mm · SP5m: 17.5 mm
• HeightSP5m: 39 mm shorterSP5m: 107.5 mm · SH530U: 146.5 mm

Relative size, not calibrated actual size. Front and side outlines share one scale and a bottom baseline. Generic outlines use recorded body dimensions, excluding camera bumps.

1. 1. SP5m

   Height

   107.5 mm

   Width

   46.2 mm

   Depth

   17.5 mm+7.6 mm versus SH530U

   Weight

   106 g

2. 2. SH530U

   Height

   146.5 mm+39 mm versus SP5m

   Width

   81 mm+34.8 mm versus SP5m

   Depth

   9.9 mm

   Weight

   168.8 g

Screen size

Approximate rectangular screens calculated from recorded diagonal and aspect ratio at one relative scale. Rounded corners and cutouts are not subtracted. These are not phone outlines or calibrated actual sizes.

1. 1. SP5m 2.2 in · 4:3 About 15 cm² rectangular area
2. 2. SH530U 5 in · 5:3 About 71.2 cm² rectangular area

SH530U has approximately 374.8% more rectangular screen area than SP5m.

Memory variants

Each row compares the same storage capacity. Cells show recorded RAM alternatives, not combined maxima. Not recorded does not mean unavailable in every market.

No unambiguous storage/RAM pairings are recorded. See the original specifications below.

Practical features

Explicit Yes and No values are shown directly. Qualified or regional records retain their details. Unknown means the record is missing.

Battery capacity

Capacity is not battery life. No endurance test is implied.

Open a section for more detail. On narrow screens, swipe sideways or use Left/Right arrow keys while the table is focused. Unknown means missing data, not No. Recorded zero values are shown as recorded.