Motorola MPx vs Palm Treo 650

Key differences

Calculated from recorded specifications using minimum difference thresholds. These are differences, not an overall ranking. For three phones, numeric highlights compare the two extremes.

• Width

  Treo 650: 2.2 mm narrower

  MPx:

  61.2 mm

  Treo 650:

  59 mm

• Screen diagonal

  Treo 650: 0.4 in smaller diagonal

  MPx:

  2.8 in

  Treo 650:

  2.4 in

• Depth

  Treo 650: 1 mm thinner

  MPx:

  24 mm

  Treo 650:

  23 mm

• Height

  MPx: 13.3 mm shorter

  MPx:

  99.7 mm

  Treo 650:

  113 mm

Relative size, not calibrated actual size. Front and side outlines share one scale and a bottom baseline. Generic outlines use recorded body dimensions, excluding camera bumps.

1. 1. MPx

   Height:

   99.7 mm

   Width:

   61.2 mm +2.2 mm versus Treo 650

   Depth:

   24 mm +1 mm versus Treo 650

2. 2. Treo 650

   Height:

   113 mm +13.3 mm versus MPx

   Width:

   59 mm

   Depth:

   23 mm

Screen size

Approximate rectangular screens calculated from recorded diagonal and aspect ratio at one relative scale. Rounded corners and cutouts are not subtracted. These are not phone outlines or calibrated actual sizes.

1. 1. MPx

   Screen diagonal:

   2.8 in

   Aspect ratio (height:width):

   4:3

   Approximate rectangular screen area:

   24.3 cm²

2. 2. Treo 650

   Screen diagonal:

   2.4 in

   Aspect ratio (height:width):

   1:1

   Approximate rectangular screen area:

   18.6 cm²

MPx has approximately 30.7% more rectangular screen area than Treo 650.

Memory variants

Each row compares the same storage capacity. Cells show recorded RAM alternatives, not combined maxima. Not recorded does not mean unavailable in every market.

No unambiguous storage/RAM pairings are recorded. See the original specifications below.

Practical features

Explicit Yes and No values are shown directly. Qualified or regional records retain their details. Unknown means the record is missing.

Battery capacity

Capacity is not battery life. No endurance test is implied.

At least two unambiguous positive capacity values are needed for a chart. Original entries remain in the specifications.

Open a section for more detail. On narrow screens, swipe sideways or use Left/Right arrow keys while the table is focused. Unknown means missing data, not No. Recorded zero values are shown as recorded.