Nokia 4.2 vs Samsung D710

Key differences

Calculated from recorded specifications using minimum difference thresholds. These are differences, not an overall ranking. For three phones, numeric highlights compare the two extremes.

• Weight

  D710: 51 g lighter

  4.2:

  161 g

  D710:

  110 g

• Width

  D710: 20.3 mm narrower

  4.2:

  71.3 mm

  D710:

  51 mm

• Chipset

  4.2:

  Qualcomm SDM439 Snapdragon 439 (12 nm)

  D710:

  TI OMAP 5910

• Rear camera layout

  4.2:

  Dual

  D710:

  Single

• Depth

  4.2: 15.6 mm thinner

  4.2:

  8.4 mm

  D710:

  24 mm

• Height

  D710: 48 mm shorter

  4.2:

  149 mm

  D710:

  101 mm

Relative size, not calibrated actual size. Front and side outlines share one scale and a bottom baseline. Generic outlines use recorded body dimensions, excluding camera bumps.

1. 1. 4.2

   Height:

   149 mm +48 mm versus D710

   Width:

   71.3 mm +20.3 mm versus D710

   Depth:

   8.4 mm

2. 2. D710

   Height:

   101 mm

   Width:

   51 mm

   Depth:

   24 mm +15.6 mm versus 4.2

Screen size

Approximate rectangular screens calculated from recorded diagonal and aspect ratio at one relative scale. Rounded corners and cutouts are not subtracted. These are not phone outlines or calibrated actual sizes.

At least two phones need compatible screen dimensions for a drawing.

1. 1. 4.2

   Screen diagonal:

   5.71 in

   Aspect ratio (height:width):

   19:9

   Approximate rectangular screen area:

   81.4 cm²

2. 2. D710

   D710: Screen geometry unavailable or conflicting.

Memory variants

Each row compares the same storage capacity. Cells show recorded RAM alternatives, not combined maxima. Not recorded does not mean unavailable in every market.

No unambiguous storage/RAM pairings are recorded. See the original specifications below.

Practical features

Explicit Yes and No values are shown directly. Qualified or regional records retain their details. Unknown means the record is missing.

Battery capacity

Capacity is not battery life. No endurance test is implied.

At least two unambiguous positive capacity values are needed for a chart. Original entries remain in the specifications.

Open a section for more detail. On narrow screens, swipe sideways or use Left/Right arrow keys while the table is focused. Unknown means missing data, not No. Recorded zero values are shown as recorded.