Panasonic P100 vs Plum Pilot Plus

Key differences

Calculated from recorded specifications using minimum difference thresholds. These are differences, not an overall ranking. For three phones, numeric highlights compare the two extremes.

• WeightPilot Plus: 31.8 g lighterPilot Plus: 143 g · P100: 174.8 g
• WidthP100: 3.5 mm narrowerP100: 73 mm · Pilot Plus: 76.5 mm
• Screen diagonalP100: 0.5 in smaller diagonalP100: 5 in · Pilot Plus: 5.5 in
• ChipsetMediatek MT6737 (28 nm) / Mediatek MT6582M (28 nm)P100: Mediatek MT6737 (28 nm) · Pilot Plus: Mediatek MT6582M (28 nm)
• DepthPilot Plus: 1.6 mm thinnerPilot Plus: 8.3 mm · P100: 9.9 mm
• HeightP100: 2.5 mm shorterP100: 145 mm · Pilot Plus: 147.5 mm

Relative size, not calibrated actual size. Front and side outlines share one scale and a bottom baseline. Generic outlines use recorded body dimensions, excluding camera bumps.

1. 1. P100

   Height

   145 mm

   Width

   73 mm

   Depth

   9.9 mm+1.6 mm versus Pilot Plus

   Weight

   174.8 g

2. 2. Pilot Plus

   Height

   147.5 mm+2.5 mm versus P100

   Width

   76.5 mm+3.5 mm versus P100

   Depth

   8.3 mm

   Weight

   143 g

Screen size

Approximate rectangular screens calculated from recorded diagonal and aspect ratio at one relative scale. Rounded corners and cutouts are not subtracted. These are not phone outlines or calibrated actual sizes.

1. 1. P100 5 in · 16:9 About 68.9 cm² rectangular area
2. 2. Pilot Plus 5.5 in · 16:9 About 83.4 cm² rectangular area

Pilot Plus has approximately 21% more rectangular screen area than P100.

Memory variants

Each row compares the same storage capacity. Cells show recorded RAM alternatives, not combined maxima. Not recorded does not mean unavailable in every market.

Practical features

Explicit Yes and No values are shown directly. Qualified or regional records retain their details. Unknown means the record is missing.

Battery capacity

Capacity is not battery life. No endurance test is implied.

Open a section for more detail. On narrow screens, swipe sideways or use Left/Right arrow keys while the table is focused. Unknown means missing data, not No. Recorded zero values are shown as recorded.