Samsung D710 vs Sony Xperia 10 II

Key differences

Calculated from recorded specifications using minimum difference thresholds. These are differences, not an overall ranking. For three phones, numeric highlights compare the two extremes.

• Weight

  D710: 41 g lighter

  D710:

  110 g

  Xperia 10 II:

  151 g

• Width

  D710: 18 mm narrower

  D710:

  51 mm

  Xperia 10 II:

  69 mm

• Chipset

  D710:

  TI OMAP 5910

  Xperia 10 II:

  Qualcomm SDM665 Snapdragon 665 (11 nm)

• Rear camera layout

  D710:

  Single

  Xperia 10 II:

  Triple

• Depth

  Xperia 10 II: 15.8 mm thinner

  D710:

  24 mm

  Xperia 10 II:

  8.2 mm

• Height

  D710: 56 mm shorter

  D710:

  101 mm

  Xperia 10 II:

  157 mm

Relative size, not calibrated actual size. Front and side outlines share one scale and a bottom baseline. Generic outlines use recorded body dimensions, excluding camera bumps.

1. 1. D710

   Height:

   101 mm

   Width:

   51 mm

   Depth:

   24 mm +15.8 mm versus Xperia 10 II

2. 2. Xperia 10 II

   Height:

   157 mm +56 mm versus D710

   Width:

   69 mm +18 mm versus D710

   Depth:

   8.2 mm

Screen size

Approximate rectangular screens calculated from recorded diagonal and aspect ratio at one relative scale. Rounded corners and cutouts are not subtracted. These are not phone outlines or calibrated actual sizes.

At least two phones need compatible screen dimensions for a drawing.

1. 1. D710

   D710: Screen geometry unavailable or conflicting.

2. 2. Xperia 10 II

   Screen diagonal:

   6 in

   Aspect ratio (height:width):

   21:9

   Approximate rectangular screen area:

   84.1 cm²

Memory variants

Each row compares the same storage capacity. Cells show recorded RAM alternatives, not combined maxima. Not recorded does not mean unavailable in every market.

Practical features

Explicit Yes and No values are shown directly. Qualified or regional records retain their details. Unknown means the record is missing.

Battery capacity

Capacity is not battery life. No endurance test is implied.

At least two unambiguous positive capacity values are needed for a chart. Original entries remain in the specifications.

Open a section for more detail. On narrow screens, swipe sideways or use Left/Right arrow keys while the table is focused. Unknown means missing data, not No. Recorded zero values are shown as recorded.