Sendo X2 vs Yezz Andy 4E2I

Key differences

Calculated from recorded specifications using minimum difference thresholds. These are differences, not an overall ranking. For three phones, numeric highlights compare the two extremes.

• WeightX2: 15 g lighterX2: 95 g · Andy 4E2I: 110 g
• Screen diagonalX2: 1.8 in smaller diagonalX2: 2.2 in · Andy 4E2I: 4 in
• ChipsetTI OMAP 5910 / Mediatek MT6572M (28 nm)X2: TI OMAP 5910 · Andy 4E2I: Mediatek MT6572M (28 nm)
• Release year2005 / 2015X2: 2005 · Andy 4E2I: 2015

Relative size, not calibrated actual size. Front and side outlines share one scale and a bottom baseline. Generic outlines use recorded body dimensions, excluding camera bumps.

1. 1. X2

   Height

   Unknown

   Width

   Unknown

   Depth

   Unknown

   Weight

   95 g

   Unavailable dimensions are omitted from the drawing.

2. 2. Andy 4E2I

   Height

   121 mm

   Width

   64.6 mm

   Depth

   10.7 mm

   Weight

   110 g

Screen size

Approximate rectangular screens calculated from recorded diagonal and aspect ratio at one relative scale. Rounded corners and cutouts are not subtracted. These are not phone outlines or calibrated actual sizes.

At least two phones need compatible screen dimensions for a drawing.

1. 1. X2 Screen geometry unavailable or conflicting
2. 2. Andy 4E2I 4 in · 5:3 About 45.5 cm² rectangular area

Memory variants

Each row compares the same storage capacity. Cells show recorded RAM alternatives, not combined maxima. Not recorded does not mean unavailable in every market.

No unambiguous storage/RAM pairings are recorded. See the original specifications below.

Practical features

Explicit Yes and No values are shown directly. Qualified or regional records retain their details. Unknown means the record is missing.

Battery capacity

Capacity is not battery life. No endurance test is implied.

At least two unambiguous positive capacity values are needed for a chart. Original entries remain in the specifications.

Open a section for more detail. On narrow screens, swipe sideways or use Left/Right arrow keys while the table is focused. Unknown means missing data, not No. Recorded zero values are shown as recorded.