Lenovo K10 Plus vs Sharp Z2

Key differences

Calculated from recorded specifications using minimum difference thresholds. These are differences, not an overall ranking. For three phones, numeric highlights compare the two extremes.

• Screen diagonal

  Z2: 0.72 in smaller diagonal

  K10 Plus:

  6.22 in

  Z2:

  5.5 in

• Chipset

  K10 Plus:

  Qualcomm SDM632 Snapdragon 632 (14 nm)

  Z2:

  Mediatek MT6797 Helio X20 (20 nm)

• Rear camera layout

  K10 Plus:

  Triple

  Z2:

  Single

• Release year

  K10 Plus:

  2019

  Z2:

  2016

Relative size, not calibrated actual size. Front and side outlines share one scale and a bottom baseline. Generic outlines use recorded body dimensions, excluding camera bumps.

1. 1. K10 Plus

   Height:

   Unknown

   Width:

   Unknown

   Depth:

   Unknown

   Weight:

   Unknown

   Unavailable dimensions are omitted from the drawing.

2. 2. Z2

   Height:

   153 mm

   Width:

   76 mm

   Depth:

   8.4 mm

   Weight:

   160 g

Screen size

Approximate rectangular screens calculated from recorded diagonal and aspect ratio at one relative scale. Rounded corners and cutouts are not subtracted. These are not phone outlines or calibrated actual sizes.

1. 1. K10 Plus

   Screen diagonal:

   6.22 in

   Aspect ratio (height:width):

   19.5:9

   Approximate rectangular screen area:

   95 cm²

2. 2. Z2

   Screen diagonal:

   5.5 in

   Aspect ratio (height:width):

   16:9

   Approximate rectangular screen area:

   83.4 cm²

K10 Plus has approximately 13.9% more rectangular screen area than Z2.

Memory variants

Each row compares the same storage capacity. Cells show recorded RAM alternatives, not combined maxima. Not recorded does not mean unavailable in every market.

Practical features

Explicit Yes and No values are shown directly. Qualified or regional records retain their details. Unknown means the record is missing.

Battery capacity

Capacity is not battery life. No endurance test is implied.

Open a section for more detail. On narrow screens, swipe sideways or use Left/Right arrow keys while the table is focused. Unknown means missing data, not No. Recorded zero values are shown as recorded.